SPEED SENSOR INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR (SP2)

   
   

   1. Install the transmission revolution sensor (SP2) to the automatic transmission case sub-assembly with the bolt.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   2. Connect the transmission revolution sensor (SP2) connector.

2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT)

   
   

   1. Coat the O-ring with ATF.

   2. Using a T30 ''TORX'' socket wrench, install the transmission revolution sensor (NT) to the automatic transmission case sub-assembly with the bolt.

      Torque:

      6.8 N*m  { 69 kgf*cm, 60 in.*lbf }

   3. Connect the transmission revolution sensor (NT) connector.

3. INSTALL TRANSMISSION REVOLUTION SENSOR (NC3)

   
   

   1. Install the transmission revolution sensor (NC3) to the automatic transmission case sub-assembly with the bolt.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   2. Connect the transmission revolution sensor (NC3) connector.

4. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

   Click here