PARK / NEUTRAL POSITION SWITCH INSPECTION

PROCEDURE


  1. INSPECT PARK/NEUTRAL POSITION SWITCH


    1. B002C92C96
      *a

      Component without harness connected

      (Park/Neutral Position Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition

      2 (RB) - 6 (PL)

      4 (B) - 5 (L)

      		 Shift lever in P Below 1 Ω
      2 (RB) - 1 (RL) Shift lever in R Below 1 Ω

      2 (RB) - 9 (NL)

      4 (B) - 5 (L)

      		 Shift lever in N Below 1 Ω
      2 (RB) - 7 (DL) Shift lever in D, M, "+" or "-" Below 1 Ω
      Shift lever not in D, M, "+" or "-" 10 kΩ or higher
      2 (RB) - 6 (PL) Shift lever not in P 10 kΩ or higher
      2 (RB) - 1 (RL) Shift lever not in R 10 kΩ or higher
      2 (RB) - 9 (NL) Shift lever not in N 10 kΩ or higher
      4 (B) - 5 (L) Shift lever not in P or N 10 kΩ or higher

      If the result is not as specified, replace the park/neutral position switch.