DRIVING SUPPORT ECU INSTALLATION

PROCEDURE

1. INSTALL DRIVING SUPPORT ECU ASSEMBLY (for LHD)

   
   

   1. Engage the guide.

   2. Install the driving support ECU assembly with the nut.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   3. Connect the connector.

2. INSTALL DRIVING SUPPORT ECU ASSEMBLY (for RHD)

   
   

   1. Install the driving support ECU assembly to the cowl side junction block RH with the 2 nuts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

3. INSTALL COWL SIDE JUNCTION BLOCK RH (for RHD)

   
   

   1. Install the cowl side junction block RH with the bolt and nut.

      Torque:

      8.0 N*m  { 82 kgf*cm, 6 ft.*lbf }

   2. Connect each connector to the cowl side junction block RH .

4. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here