| DTC Code | DTC Name |
|---|---|
| P062F | Internal Control Module EEPROM Error |
DESCRIPTION
The TCM monitors its internal operation and will store this DTC when it detects an internal malfunction.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory |
|---|---|---|---|---|---|
| P062F | Internal Control Module EEPROM Error | TCM internal error (EEPROM) | TCM | Comes on | DTC stored |
MONITOR DESCRIPTION
The TCM monitors its internal operation. If the internal operation is malfunctioning, the TCM will illuminate the MIL and store this DTC.
CAUTION / NOTICE / HINT
Note
Perform registration and/or initialization when parts related to the automatic transmission are replaced.
DTC P062F is issued by either the ECM or TCM. Use the GTS to conduct a health check to confirm which ECU the DTC is issued from and then inspect the related system.
Tech Tips
After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.
Start the engine and wait for 11 seconds or more.
Check for DTCs again.
PROCEDURE
READ OUTPUT DTC (DTC P062F)
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Clear the DTCs.
Tech Tips
Write down the currently output DTCs before clearing them.
Turn the engine switch off and turn the GTS off.
Disconnect the GTS.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menu items: Powertrain / ECT / Trouble Codes.
Read DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
CHECK FOR INTERMITTENT PROBLEMS Click here |
| B |
|
REPLACE TCM
Replace the TCM.
| Result | ||
|---|---|---|
|
| NEXT |
|
PERFORM A/T CODE REGISTRATION Click here |