LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LANE DEPARTURE ALERT SYSTEM (w/ Steering Control)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.


    1. Customizing with the Multi-information display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Settings Tab / Settings / Lane Departure Alert Setup

      3. Select the setting by referring to the table below.

      4. Change the settings of the lane departure alert using the steering pad switch assembly.

        Lane Departure Alert
        Display Content Setting Default
        Steering Assist Steering assist function On/Off On
        Warning Sensitivity Timing of lane departure warning High/Standard Standard
        Vehicle Sway Warning Vehicle sway warning function On/Off On
        Sway Sensitivity Vehicle sway detection sensitivity High/Standard/Low Standard