OIL LEVEL SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  2. REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY

    Click here

  3. REMOVE FRONT LOWER SUSPENSION MEMBER PROTECTOR

    Click here

  4. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  5. DRAIN ENGINE OIL

    Click here

  6. SEPARATE OIL COOLER TUBE


    1. A01Q98Y

      Remove the 2 bolts and separate the oil cooler tube.

  7. REMOVE CRANK POSITION SENSOR BRACKET


    1. A01Q9OH

      Disengage the clamp.

    2. Remove the bolt and crank position sensor bracket.

  8. REMOVE ENGINE OIL LEVEL SENSOR


    1. A01QD1X

      Disconnect the engine oil level sensor connector.

    2. A01Q9F9

      Remove the 4 bolts.

    3. A01Q9UO

      Rotate the engine oil level sensor 180° counterclockwise and remove it from the oil pan sub-assembly.

    4. A01QBWNC10
      *a Cutting Position
      *b Supply Part

      Cut off the gasket as shown in the illustration.

    5. Remove the gasket from the engine oil level sensor.

      Tech Tips

      After cutting off the portions of the gasket shown in the illustration, remove only the outer part of the gasket.