THERMOSTAT REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE CENTER NO. 4 ENGINE UNDER COVER

    Click here

  3. DRAIN ENGINE COOLANT

    Click here

  4. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  5. DISCONNECT VENTILATION HOSE

    Click here

  6. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  7. DISCONNECT NO. 2 RADIATOR HOSE

    Click here

  8. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY


    1. A01QB4P

      Remove the 3 nuts and water inlet with thermostat sub-assembly from the water inlet housing.

    2. Remove the No. 2 water inlet housing gasket from the water inlet with thermostat sub-assembly.