SHIFT PADDLE SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Note

Do not rotate the spiral cable without the steering wheel assembly with the battery connected and the engine switch on (IG).

PROCEDURE


  1. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)


    1. Install the 2 shift paddle switches (transmission shift switch assemblies) to the steering wheel assembly with 4 new screws.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

    2. Engage the 5 guides to install the No. 1 switch wire to the steering wheel assembly.

    3. Connect the 2 shift paddle switch (transmission shift switch assembly) connectors.

    4. Connect the No. 1 switch wire connector.

    5. Engage the No. 1 switch wire connector clamp to the steering wheel assembly.

  2. INSTALL STEERING WHEEL ASSEMBLY

    Click here