KICK-DOWN SWITCH(for LHD) INSPECTION

PROCEDURE


  1. INSPECT KICK DOWN SWITCH ASSEMBLY


    1. A01Q8KEC03
      *a

      Component without harness connected

      (Kick Down Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (KD) - 2 (E)

      Continuously press

      (Kick down switch is on)

      		 Below 1 Ω

      Released

      (Kick down switch is off)

      		 10 kΩ or higher

      If the result is not as specified, replace the kick down switch assembly.