OIL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL FRONT OIL PUMP OIL SEAL


    1. A01XQGWN01

      Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.

      SST
      09350-30020   ( 09351-32140 )
      Standard Depth
      -0.2 to 0.2 mm (-0.00787 to 0.00787 in.)

      Tech Tips

      The front oil pump oil seal end should be flush with the outer edge of the front oil pump body sub-assembly.

    2. Coat the lip of the front oil pump oil seal with MP grease.

  2. SECURE FRONT OIL PUMP BODY SUB-ASSEMBLY


    1. Install the front oil pump body sub-assembly to the torque converter assembly.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR


    1. A01XQ0FC01
      *1 Front Oil Pump Driven Gear

      Coat the front oil pump driven gear with ATF.

    2. Install the front oil pump driven gear to the front oil pump body sub-assembly.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR


    1. A01XPYBC01
      *1 Front Oil Pump Drive Gear

      Coat the front oil pump drive gear with ATF.

    2. Install the front oil pump drive gear to the front oil pump body sub-assembly.

  5. INSTALL FRONT OIL PUMP BODY O-RING


    1. A01XQASC01
      *1 Front Oil Pump Body O-ring

      Coat a new front oil pump body O-ring with ATF and install it to the front oil pump body sub-assembly.

  6. INSTALL STATOR SHAFT ASSEMBLY


    1. A01XRFOC01
      *a Matchmark

      Align the matchmarks, and install the stator shaft assembly to the front oil pump body sub-assembly quickly.

    2. A01Q9WT

      Using a T30 "TORX" socket wrench, install the 2 bolts.

      Torque:
      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

  7. INSTALL STATOR SHAFT CLUTCH DRUM THRUST WASHER


    1. A01XRPLC01
      *1 Stator Shaft Clutch Drum Thrust Washer

      Align the 2 claws and install the stator shaft clutch drum thrust washer to the stator shaft assembly.

  8. INSTALL STATOR SHAFT PISTON


    1. A01XR4WC01
      *1 O-ring

      Coat 2 new O-rings with ATF and install them to the stator shaft piston.

    2. A01XQBQC01
      *1 Stator Shaft Spring Sub-assembly
      *2 Stator Shaft Piston

      Install the stator shaft piston and stator shaft spring sub-assembly to the oil pump assembly.

    3. Using a T30 "TORX" socket wrench, install the 5 bolts.

      Torque:
      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

  9. INSPECT FRONT OIL PUMP DRIVE GEAR ROTATION

    Click here

  10. INSTALL CLUTCH DRUM OIL SEAL RING


    1. Coat 4 new clutch drum oil seal rings with ATF.

      Note

      Do not expand the gap of the clutch drum oil seal rings excessively.

    2. A01QB1S

      Install the 4 clutch drum oil seal rings to the oil pump assembly.

      Tech Tips

      After installing the clutch drum oil seal rings, check that they rotate smoothly.

  11. INSTALL OIL PUMP O-RING


    1. B002F08C01
      *1 Oil Pump Assembly
      *2 Oil Pump O-ring

      Coat a new oil pump O-ring with ATF and install it to the oil pump assembly.