WHEEL OPENING MOULDING(for Rear) DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE NO. 1 BODY OUTSIDE MOULDING PAD


    1. A001R7U

      Remove the No. 1 body outside moulding pad (double-sided tape).

      Tech Tips

      Do not pull on No. 1 body outside moulding pad (double-sided tape). Instead, roll the tape up with your finger to remove it cleanly.

      A001OYH

    2. Using non-residue solvent and a cloth, wipe off any No. 1 body outside moulding pad (double-sided tape) remaining on the quarter outside moulding.