ROOF DRIP SIDE FINISH MOULDING REMOVAL

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING


    1. A001P6GC01
      B0048V2 Protective Tape

      Apply protective tape around the center roof drip side finish moulding.

    2. A001O64

      Using a moulding remover D, disengage the 2 clips to remove the center roof drip side finish moulding.

      Note


      • Do not remove the roof drip side finish moulding clips.

      • If a roof drip side finish moulding clip is damaged or falls off, replace it with a new one.