REAR DOOR OUTSIDE MOULDING REASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NO. 2 OUTSIDE MOULDING RETAINER

   
   

   1. When using a new rear door outside moulding:

      
      

      1. Clean the surface of a new rear door outside moulding.

   2. When reusing the rear door outside moulding:

      
      

      1. Remove the double-sided tape from the rear door outside moulding.

      2. Wipe off any tape adhesive residue with cleaner.

   3. Install a new No.2 outside moulding retainer.

      
      

      1. Remove the peeling paper from the face of the No.2 outside moulding retainer.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. 

         *1	Mark-off Line
         *a	4.0 mm (0.157 in.)

         Install the No.2 outside moulding retainer as shown in the illustration.

2. INSTALL REAR DOOR UPPER OUTSIDE MOULDING PAD

   
   

   1. When using a new rear door outside moulding:

      
      

      1. Clean the surface of a new rear door outside moulding.

   2. When reusing the rear door outside moulding:

      
      

      1. Remove the double-sided tape from the rear door outside moulding.

      2. Wipe off any tape adhesive residue with cleaner.

   3. Install a new rear door upper outside moulding pad.

      
      

      1. Remove the peeling paper from the face of the rear door upper outside moulding pad.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. 

         *1	Mark-off Line
         *a	3.0 mm (0.118 in.)
         *b	13 mm (0.512 in.)

         Install the rear door upper outside moulding pad as shown in the illustration.