ROCKER PANEL MOULDING INSTALLATION

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL ROCKER PANEL MOULDING


    1. Engage the clips to install the rocker panel moulding as shown in the illustration.

      A005O4UC01
      B0048R7 Install in this Direction (1) B0048O3 Install in this Direction (2)
    2. A005O3BC01
      B0048R7 Install in this Direction

      Engage the claw to connect the quarter outside moulding LH as shown in the illustration.

    3. Install the 5 screws.

    4. Install the 8 new clips.

    5. Remove the protective tape.

  2. INSTALL REAR WHEEL HOUSE FRONT PLATE

    Click here