ROCKER PANEL MOULDING REMOVAL

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL HOUSE FRONT PLATE

    Click here

  2. REMOVE ROCKER PANEL MOULDING


    1. Apply protective tape around the rocker panel moulding and doors as shown in the illustration.

      A005N4MC01
      B0048V2 Protective Tape - -

    2. Remove the 8 clips.

      A005MTZ

    3. Remove the 5 screws.

      A005NPG
    4. A005O8ZC01
      B0048R7 Remove in this Direction

      Remove the screws.

    5. Disengage the claw to disconnect the quarter outside moulding LH as shown in the illustration.

    6. Disengage the clips to remove the rocker panel moulding as shown in the illustration.

      A005NV2C01
      B0048R7 Remove in this Direction (1) B0048O3 Remove in this Direction (2)