FRONT DOOR BELT MOULDING INSTALLATION

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY


    1. A001PDJC01
      B0048R7 Install in this Direction

      Engage the claws to install a new front door belt moulding assembly as shown in the illustration.

    2. Remove the protective tape.

  2. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  3. INSTALL FRONT DOOR SERVICE HOLE COVER

    Click here

  4. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

    Click here

  5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  6. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  7. INSPECT POWER WINDOW OPERATION

    Click here