RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HORN RELAY ASSEMBLY


    1. A005NCMN05

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
        3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the horn relay assembly.