RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT FOG FR RELAY


    1. A005NCMN04

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
        3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the fog fr relay.

  2. INSPECT HEADLIGHT DIMMER RELAY


    1. A005NCMN04

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
        3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

        If the result is not as specified, replace the headlight dimmer relay.