HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE


  1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. A001R8JC01
      *a Clamp
      *b Fook

      Engage the hook.

    2. Install the rear height control sensor sub-assembly LH with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Engage the clamp.

    4. Connect the connector.

  2. INSTALL REAR WHEEL (for LH Side)

    Click here

  3. PERFORM INITIALIZATION

    Click here

  4. INSPECT HEADLIGHT AIMING

    Click here