REAR BUMPER INSTALLATION

Info Added 2017-10-06

PROCEDURE


  1. INSTALL REAR BUMPER ASSEMBLY


    1. A005NBKC02
      B0048R7 Install in the Direction

      Connect the connector.

    2. Engage the claws as shown in the illustration.

    3. A005MUVC01
      B0048R7 Install in the Direction

      Engage the claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. Install the bolt.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. Install the rear bumper upper cover LH.

      Tech Tips

      Use the same procedure as for the LH side.

    6. Install the rear bumper assembly with the 4 clips.

  2. INSTALL QUARTER OUTSIDE MOULDING LH


    1. Engage the claws to install the quarter outside moulding LH.

    2. Install the 2 screws.

  3. INSTALL QUARTER OUTSIDE MOULDING RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. INSTALL REAR BUMPER SIDE SEAL LH


    1. Install the rear bumper side seal LH with the 6 clips.

  5. INSTALL REAR BUMPER SIDE SEAL RH

    Tech Tips

    Use the same procedure as for the LH side.