HEADLIGHT DIMMER SWITCH INSPECTION

PROCEDURE

1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for Light Control Switch RH Side Type)

   
   

   1. Check the resistance.

      
      
      1. 

         *a	Component without harness connected (Headlight Dimmer Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Light Control Switch Tester Connection Condition Specified Condition 13 (T) - 16 (EL) Light control switch in off position 10 kΩ or higher 12 (H) - 16 (EL) Light control switch in off position 10 kΩ or higher 11 (A) - 16 (EL) Light control switch in off position 10 kΩ or higher 13 (T) - 16 (EL) Light control switch in tail position Below 1 Ω 13 (T) - 16 (EL) Light control switch in head position Below 1 Ω 12 (H) - 16 (EL) Light control switch in head position Below 1 Ω 11 (A) - 16 (EL) Light control switch in AUTO position Below 1 Ω
         Dimmer Switch Tester Connection Condition Specified Condition 17 (HU) - 16 (EL) Dimmer switch in high position Below 1 Ω 17 (HU) - 16 (EL) Dimmer switch in high position Below 1 Ω 14 (HF) - 16 (EL) Dimmer switch in flash position Below 1 Ω
         Turn Signal Switch Tester Connection Condition Specified Condition 20 (TR) - 16 (EL) Turn signal switch in neutral position 10 kΩ or higher 19 (TL) - 16 (EL) 10 kΩ or higher 18 (CR) - 16 (EL) 10 kΩ or higher 20 (TR) - 16 (EL) Turn signal switch in right turn position Below 1 Ω 18 (CR) - 16 (EL) Turn signal switch in full right turn position Below 1 Ω 19 (TL) - 16 (EL) Turn signal switch in left turn position Below 1 Ω 18 (CR) - 16 (EL) Turn signal switch in full left turn position Below 1 Ω
         Fog Light Switch Tester Connection Condition Specified Condition 2 (BFG) - 3 (LFG) Fog light switch off 10 kΩ or higher 2 (BFG) - 3 (LFG) Fog light switch in front position Below 1 Ω 4 (B) - 3 (LFG) Fog light switch off 10 kΩ or higher 4 (B) - 3 (LFG) Fog light switch in rear position Below 1 Ω

2. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for Light Control Switch LH Side Type)

   
   

   1. Check the resistance.

      
      
      1. 

         *a	Component without harness connected (Headlight Dimmer Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Light Control Switch Tester Connection Condition Specified Condition 18 (T) - 15 (EL) Light control switch in off position 10 kΩ or higher 19 (H) - 15 (EL) Light control switch in off position 10 kΩ or higher 20 (A) - 15 (EL) Light control switch in off position 10 kΩ or higher 18 (T) - 15 (EL) Light control switch in tail position Below 1 Ω 18 (T) - 15 (EL) Light control switch in head position Below 1 Ω 19 (H) - 15 (EL) Light control switch in head position Below 1 Ω 20 (A) - 15 (EL) Light control switch in AUTO position Below 1 Ω
         Dimmer Switch Tester Connection Condition Specified Condition 14 (HU) - 15 (EL) Dimmer switch in high position Below 1 Ω 14 (HU) - 15 (EL) Dimmer switch in high position Below 1 Ω 17 (HF) - 15 (EL) Dimmer switch in flash position Below 1 Ω
         Turn Signal Switch Tester Connection Condition Specified Condition 12 (TR) - 15 (EL) Turn signal switch in neutral position 10 kΩ or higher 11 (TL) - 15 (EL) 10 kΩ or higher 13 (CR) - 15 (EL) 10 kΩ or higher 12 (TR) - 15 (EL) Turn signal switch in right turn position Below 1 Ω 13 (CR) - 15 (EL) Turn signal switch in full right turn position Below 1 Ω 11 (TL) - 15 (EL) Turn signal switch in left turn position Below 1 Ω 13 (CR) - 15 (EL) Turn signal switch in full left turn position Below 1 Ω
         Fog Light Switch Tester Connection Condition Specified Condition 9 (BFG) - 8 (LFG) Fog light switch off 10 kΩ or higher 9 (BFG) - 8 (LFG) Fog light switch in front position Below 1 Ω 7 (B) - 8 (LFG) Fog light switch off 10 kΩ or higher 7 (B) - 8 (LFG) Fog light switch in rear position Below 1 Ω