REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type) DISASSEMBLY

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT LED


    1. A001QVPC01
      B0048R7 Remove in this Direction

      Disconnect the connector.

    2. Remove the screw.

    3. Turn the rear combination light LED as shown in the illustration to remove it.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A001ROYC01
      B0048R7 Remove in this Direction

      Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to disconnect them as a unit.

    2. A001PB0C02
      B0048R7 Remove in this Direction

      Remove the rear turn signal light bulb from the rear combination light socket and wire.

  3. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE


    1. A001Q71

      Disengage the clamp.

    2. Disconnect the connector to remove the rear combination light socket and wire.