REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type) REMOVAL

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT COVER


    1. A001Q96C02
      B0048R7 Remove in this Direction

      Disengage the claws to remove the rear combination light cover as shown in the illustration.

  2. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A001NRNC02
      B0048V2 Protective Tape

      Apply protective tape around the rear combination light assembly as shown in the illustration.

    2. Remove the 2 screws.

    3. A001P9XC02
      B0048R7 Remove in this Direction

      Pull the rear combination light assembly toward the rear of the vehicle as shown in the illustration to disengage the clip, guide and pin to separate the rear combination light assembly.

      Note

      To prevent the rear combination light assembly from falling when disengaging the pins and guides, lightly hold the rear combination light assembly.

    4. A001OWC

      Disconnect the connector to remove the rear combination light assembly.