REAR COMBINATION LIGHT ASSEMBLY(for LED Type) INSTALLATION

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. Connect the connector.

    2. A001PY1C01
      B0048R7 Install in this Direction

      Engage the guide, pin and clip to temporarily install the rear combination light assembly as shown in the illustration.

    3. Install the rear combination light assembly with the 2 screws.

    4. Remove the protective tape.

  2. INSTALL REAR COMBINATION LIGHT COVER


    1. A001PSHC01
      B0048R7 Install in this Direction

      Engage the claws to install the rear combination light cover as shown in the illustration.