FOG LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FOG LIGHT ASSEMBLY LH (for LED Type)


    1. A001Q69C05
      *a

      Component without harness connected

      (Fog Light Assembly LH)

      Apply auxiliary battery voltage to the fog light assembly LH and check that the light comes on.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 2 (B)

      Auxiliary battery negative (-) → Terminal 1 (E)

      		 Fog light comes on

      If the result is not as specified, replace the fog light assembly LH.

  2. INSPECT FOG LIGHT ASSEMBLY RH (for LED Type)


    1. A001Q69C06
      *a

      Component without harness connected

      (Fog Light Assembly RH)

      Apply auxiliary battery voltage to the fog light assembly RH and check that the light comes on.

      OK
      Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 2 (B)

      Auxiliary battery negative (-) → Terminal 1 (E)

      		 Fog light comes on

      If the result is not as specified, replace the fog light assembly RH.