REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type) REASSEMBLY

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE


    1. A001Q71

      Connect the connector.

    2. Engage the clamp to install the rear combination light socket and wire.

  2. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. A001RSKC02
      B0048R7 Install in this Direction

      Install the rear turn signal light bulb to the rear combination light socket and wire.

    2. A001PS7C01
      B0048R7 Install in this Direction

      Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to connect them as a unit.

  3. INSTALL REAR COMBINATION LIGHT LED


    1. A001OK8C01
      B0048R7 Install in this Direction

      Turn the rear combination light LED as shown in the illustration to install it.

    2. Install the screw.

    3. Connect the connector.