HEADLIGHT ASSEMBLY(for LED Headlight) INSTALLATION

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. A001OCFC01
      B0048R7 Install in this Direction

      Temporarily install the headlight assembly as shown in the illustration.

    2. Install the headlight assembly with the bolt and 3 screws.

      Torque:
      Bolt
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }
    3. A001OZ7C01
      *a Connector Lock Lever
      B0048R7 Install in this Direction

      Connect the connector and raise the connector lock lever to engage the claw and lock the connector as shown in the illustration.

    4. Remove the protective tape.

  2. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  3. PERFORM INITIALIZATION

    Click here

  4. ADJUST HEADLIGHT AIMING

    Click here