LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch to on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control, Illuminated Entry or Warning.

      5. Select the setting by referring to the table below.


        Light Control
        Tester Display Description Default Setting ECU
        Disp Ex ON Sen Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
        Disp Ex OFF Sen Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B NORMAL 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 Main Body ECU (Multiplex Network Body ECU)
        Sensitivity Adjusts the sensitivity of the automatic light control system.*C Normal 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 Main Body ECU (Multiplex Network Body ECU)
        Follow Me Home Lighting Time Sets the headlight lighting time after the power switch is turned off.*1 30 s 00:30 s,01:60 s,10:90 s,11:120 s Main Body ECU (Multiplex Network Body ECU)

        Warning
        Tester Display Description Default Setting ECU
        Lane Change Flashing Times Setting Function to change the lane change flashing times. 3 000:OFF,001:3,010:4,011:5,100:6,101:7 Combination Meter Assembly

        • *1: w/ Follow Me Home System

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


        • *A

          A001QQZE01

        • *B

          A001QQZE02

        • *C

          A001QQZE03

        Illuminated Entry
        Tester Display Description Default Setting ECU
        Mirr-Foot-Lgt Approached/Exterior Light Approached Lights up the door mirror foot lights when a key enters any actuation area around the doors.*1 ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
        Mirr-Foot-Lgt Unlocked/Exterior Light Unlocked Lights up door mirror foot lights when doors are unlocked using a mechanical key or door control transmitter.*1 ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
        Mirror Foot Light Time/Exterior Light Time Changes the lighting time of the door mirror foot lights.*1 15 s 00:15 s,01:7.5 s,10:30 s,11:0 s Main Body ECU (Multiplex Network Body ECU)
        Exterior Light Control Changes the door mirror foot light control.*1 ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)

        • *1: w/ Door Mirror Foot Light Control

    2. Customizing with the multi-display


      1. Turn the power switch to on (IG).

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Lights settings.

      3. Select the setting by referring to the table below.

        Lights settings
        Tester Display Description Default Setting ECU
        Light sensor sensitivity Adjusts the sensitivity of the automatic light control system.*A 0 -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
        Exterior lights off timer Changes the lighting time of the door mirror foot lights.*1 15 sec. Off, 7.5 sec., 15 sec. or 30 sec. Main Body ECU (Multiplex Network Body ECU)

        • *1: w/ Door Mirror Foot Light Control

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.


        • *A

          A001QQZE05
          *a Sensitivity of the automatic light control system
          *b Dark
          *c Bright
          *d Setting