LIGHTING SYSTEM INITIALIZATION


  1. HEADLIGHT ECU SUB-ASSEMBLY LH INITIALIZATION (for LED Headlight)

    Note


    • If any of the work in the table below has been performed, vehicle information registration and initialization of the headlight ECU sub-assembly LH are necessary.

      Performed Work or System Condition Necessary Procedures Link
      Replacement of the headlight ECU sub-assembly LH Vehicle information registration for the headlight ECU sub-assembly LH

      Click here

      Initialization of the headlight ECU sub-assembly LH
      Work that changes the vehicle height such as replacement or removal/installation of the rear height control sensor sub-assembly LH or replacement of suspension components Initialization of the headlight ECU sub-assembly LH

    • A new headlight ECU sub-assembly LH cannot operate until the vehicle information is registered.

    • After replacing the headlight ECU sub-assembly LH, it is necessary to register the vehicle information and then perform initialization.

    • Even if the headlight ECU sub-assembly RH is replaced with a new one, vehicle information registration and initialization are not necessary.