LIGHTING SYSTEM OPERATION CHECK


  1. AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK


    1. Turn the power switch on (IG).

    2. Turn the light control switch to the AUTO position.

    3. Cover the automatic light control sensor.

    4. Check that the taillights and low beam headlights come on.

    5. Uncover the automatic light control sensor.

    6. Check that the low beam headlights and taillights go off.

  2. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK


    1. When the light control switch is in the tail or head position


      1. Turn the power switch to on (IG).

      2. Turn the headlights or front fog lights*1 on.

      3. Turn the power switch off.

      4. Check that the headlights and front fog lights*1 go off immediately.

        Tech Tips

        The taillights and rear fog light remain on.


        • *1: w/ Front Fog Light

    2. When the light control switch is in the AUTO position


      1. Turn the power switch to on (IG).

      2. Turn the taillights, headlights, front fog lights*1 or rear fog light on.

      3. Turn the power switch off.

      4. Check that all of the lights go off immediately.


        • *1: w/ Front Fog Light

  3. DAYTIME RUNNING LIGHT SYSTEM OPERATION CHECK


    1. Turn the light control switch to the AUTO position (with the taillights not turned on via the automatic light control system).

    2. Turn the power switch on (READY).

    3. Release the parking brake.

    4. Check that the daytime running lights come on.

  4. FOLLOW ME HOME SYSTEM OPERATION CHECK (w/ Follow Me Home System)


    1. Turn the power switch off.

    2. Turn the light control switch to the AUTO position.

    3. Pull the light control switch to flash the headlights once.

    4. Check that the low beam headlights come on for approximately 30 seconds.

  5. DOOR MIRROR FOOT LIGHT CONTROL OPERATION CHECK (w/ Door Mirror Foot Light Control)


    1. The operation and condition of this control are described below.

      Operation Condition
      Fade in and illuminate constantly

      When any of the following conditions is met, the lights fade in and illuminate constantly:


      • A key is detected in the actuation area.*1

      • Any door is unlocked when the power switch is off and all of the doors are closed.
      Illuminate for 15 seconds, and then fade out

      When any of the following conditions is met, the lights illuminate for 15 seconds, and then fade out:


      • An actuation area-linked function is used.*1, *2

      • Any door is unlocked when the power switch is off and all of the doors are closed.
      Fade out immediately

      When the following condition is met, the lights fade out immediately:


      • The power switch is turned from off to on (IG).

      • A key is not detected in the actuation area.*1

      • All doors are locked when all doors are closed and any door is unlocked.

      • *1: w/ Entry Function

      Tech Tips

      *2: When the lights are on, if the key leaves the actuation areas around the doors, the lights fade out after approximately 3 seconds.