WASHER NOZZLE(for Front Side) REMOVAL

Info Added 2017-10-06

CAUTION / NOTICE / HINT

PROCEDURE


  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY

    Tech Tips

    Use the same procedure as for the opposite side.


    1. A001NXQC01
      *a Protective Tape
      B0048R7 Remove in this Direction (1)
      B0048O3 Remove in this Direction (2)

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws as indicated by the arrows, shown in the illustration to separate the washer nozzle sub-assembly.

      Note

      Be careful not to damage the windshield glass.

    2. A001QSB

      Disconnect the washer hose to remove the washer nozzle sub-assembly.

      Note

      Washer nozzle sub-assemblies cannot be reused.