WASHER NOZZLE(for Front Side) ON-VEHICLE INSPECTION

Info Added 2017-10-06

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. Operate the washer nozzle sub-assemblies and check the position that the washer fluid contacts the windshield.

      Standard
      Washer fluid contacts the windshield in the areas shown in the illustration.
      A001OF2C01
      *a Upper Limit *b Standard
      *c Lower Limit - -
      B0048V2 Measurement - -
      Standard Measurement
      Area Measurement Area Measurement
      A 341.0 mm (13.43 in.) B 187.0 mm (7.36 in.)
      C 82.5 mm (3.25 in.) - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.