WASHER MOTOR INSTALLATION

Info Added 2017-10-06

PROCEDURE


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A005NELC01
      B0048R7 Install in this Direction

      Install the washer motor and pump assembly as shown in the illustration.

    2. Connect the connector.

    3. Connect the washer hose.

  2. ADD WASHER FLUID


    1. Connect the rear washer hose.

    2. Add washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER RH


    1. Install the front fender liner RH with the 6 clips and 6 screws.

    2. A005NIU

      Install the pin hold clips as shown in the illustration.

      Note

      Insert each pin hold clip with the slot aligned vertically. Do not rotate the pin hold clip after inserting it. After installation, confirm that the slot is aligned vertically.

  4. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY RH

    Click here

  5. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH

    Click here

  6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH


    1. Install the front wheel opening extension pad RH with the 5 screws.

  7. INSTALL FRONT WHEEL RH

    Click here