WASHER MOTOR INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (for Front Side)

    Tech Tips

    This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


    1. Fill the windshield washer jar assembly with washer fluid.

    2. A001P6AC01
      *a Component without harness connected (Windshield Washer Motor and Pump Assembly)

      Check that washer fluid flows from the windshield washer jar assembly.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2 (+)

      Battery negative (-) → Terminal 1 (-)

      		 Washer fluid flows from the windshield washer jar assembly

      If the result is not as specified, replace the windshield washer motor and pump assembly.

  2. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (for Rear Side)

    Tech Tips

    This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


    1. Fill the windshield washer jar assembly with washer fluid.

    2. A001P6AC02
      *a Component without harness connected (Windshield Washer Motor and Pump Assembly)

      Check that washer fluid flows from the windshield washer jar assembly.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1 (+)

      Battery negative (-) → Terminal 2 (-)

      		 Washer fluid flows from the windshield washer jar assembly

      If the result is not as specified, replace the windshield washer motor and pump assembly.