RELAY ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT MIRROR CONTROL RELAY

   
   

   1. Check the resistance.

      
      

      1. 

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 3 - 4 Auxiliary battery voltage applied to terminals 1 and 2 10 kΩ or higher 3 - 4 Auxiliary battery voltage not applied between terminals Below 1 Ω 3 - 5 Auxiliary battery voltage applied to terminals 1 and 2 Below 1 Ω 3 - 5 Auxiliary battery voltage not applied between terminals 10 kΩ or higher 4 - 5 Always 10 kΩ or higher

         If the result is not as specified, replace the mirror control relay.