BACK DOOR SUPPORT DISPOSAL

PROCEDURE


  1. DISPOSE OF BACK DOOR STAY ASSEMBLY


    1. Fully extend the back door stay assembly.

    2. Secure the back door stay assembly horizontally in a vise with the piston rod pulled out.

    3. A005MWAN08

      Wearing protective glass, gradually cut the shaded part between "A" and "B" shown the illustration using a metal saw to gradually release the gas.

      Specification
      Area Measurement
      A - B 53.5 mm (2.11 in.)

      CAUTION:

      Always use proper safety equipment and be careful when drilling because shards of metal way fly about.

      A005NYQ

      Tech Tips

      The gas is colorless, odorless and non-poisonous.