FUEL LID OPENER SWITCH INSPECTION

PROCEDURE


  1. INSPECT FUEL LID OPENER SWITCH (for LHD)


    1. A005NOPC01
      *a

      Component without harness connected

      (Fuel Lid Opener Switch)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        4 (IG) - 1 (E) Pressed (ON) Below 1 Ω
        4 (IG) - 1 (E) Not pressed (OFF) 10 kΩ or higher

        If the result is not as specified, replace the fuel lid opener switch.

    2. A005NOPC02
      *a

      Component without harness connected

      (Fuel Lid Opener Switch)

      Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the fuel lid opener switch and check that the fuel lid opener switch illuminates.

        OK
        Auxiliary battery Connection Specified Condition
        Auxiliary battery positive (+) → 3 (ILL+) LED illuminates
        Auxiliary battery negative (-) → 2 (ILL-)

        If the result is not as specified, replace the fuel lid opener switch.

  2. INSPECT FUEL LID OPENER SWITCH (for RHD)


    1. A005N00C03
      *a

      Component without harness connected

      (Fuel Lid Opener Switch)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        4 (IG) - 1 (E) Pressed (ON) Below 1 Ω
        4 (IG) - 1 (E) Not pressed (OFF) 10 kΩ or higher

        If the result is not as specified, replace the fuel lid opener switch.

    2. A005N00C04
      *a

      Component without harness connected

      (Fuel Lid Opener Switch)

      Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the fuel lid opener switch and check that the fuel lid opener switch illuminates.

        OK
        Auxiliary battery Connection Specified Condition
        Auxiliary battery positive (+) → 3 (ILL+) LED illuminates
        Auxiliary battery negative (-) → 2 (ILL-)

        If the result is not as specified, replace the fuel lid opener switch.