RELAY ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT DEFOGGER RELAY

   
   

   1. Check the resistance.

      
      

      1. 

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 3 - 4 Auxiliary battery voltage applied to terminals 1 and 2 10 kΩ or higher 3 - 4 Auxiliary battery voltage not applied between terminals Below 1 Ω 3 - 5 Auxiliary battery voltage applied to terminals 1 and 2 Below 1 Ω 3 - 5 Auxiliary battery voltage not applied between terminals 10 kΩ or higher 4 - 5 Always 10 kΩ or higher

         If the result is not as specified, replace the defogger relay.