CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
Disconnect the F73 air conditioning amplifier assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
Tech Tips
Measure the values on the wire harness side with the connector disconnected.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| F73-2 (IG+) - F73-4 (GND) | B - W-B | Power source (IG) | Power switch on (IG) | 11 to 14 V |
| F73-2 (IG+) - F73-4 (GND) | B - W-B | Power source (IG) | Power switch off | Below 1 V |
| F73-1 (B) - F73-4 (GND) | V - W-B | Battery power supply | Power switch off | 11 to 14 V |
| F73-4 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
If the result is not as specified, there may be a malfunction in the wire harness.
Reconnect the F73 air conditioning amplifier assembly connector.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| F73-5 (RDFG) - F73-4 (GND) | P - W-B | Rear window defogger signal | Power switch on (IG), rear window defogger switch off | 11 to 14 V |
| F73-5 (RDFG) - F73-4 (GND) | P - W-B | Rear window defogger signal | Power switch on (IG), rear window defogger switch on | Below 1 V |
| F73-14 (LIN1) - F73-4 (GND) | L - W-B*1 BE - W-B*2 |
LIN communication line | Power switch on (IG) | Pulse generation |
If the result is not as specified, the air conditioning amplifier assembly may be malfunctioning.
*1: for LHD
*2: for RHD
CHECK AIR CONDITIONING CONTROL ASSEMBLY
Check for pulses according to the value(s) in the table below.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| F61-2 (LIN1) - F61-16 (GND) | L - W-B | LIN communication line | Power switch on (IG) | Pulse generation |
If the result is not as specified, the air conditioning control assembly may be malfunctioning.