BACK DOOR GLASS ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT GLASS BREAKAGE SENSOR


    1. Check the resistance.


      1. A001OL5C01
        *1

        Back Door Glass

        (View from inside the vehicle)
        *a

        Component without harness connected

        (Glass Breakage Sensor)
        *b Terminal C
        *c Terminal D

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        Terminal C - Terminal D Always Below 1 Ω

        If the result is not as specified, replace the glass breakage sensor.