NETWORK GATEWAY ECU(for LHD) REMOVAL

PROCEDURE


  1. REMOVE NO. 2 INSTRUMENT PANEL LOWER FINISH PANEL

    Click here

  2. REMOVE ECU INTEGRATION BOX RH


    1. A001NY8

      Disconnect the 7 connectors.

    2. Disengage the clamps.

    3. A001NW1

      Remove the bolt, 2 nuts and ECU integration box RH.

  3. REMOVE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)


    1. Disengage the claws to remove the central gateway ECU (network gateway ECU).

      A001RSD

      Note


      • If the ECU integration box RH is deformed or damaged, replace it.

      • Do not bend the claws more than necessary.