ULTRASONIC SENSOR(for Front) REMOVAL

Info Added 2017-10-06

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE FRONT SIDE ULTRASONIC SENSOR

    Tech Tips

    The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


    1. A001ORO

      Disconnect the connector.

    2. A005MMSC01
      B0048R7 Remove in this Direction

      Disengage the claws to remove the front side ultrasonic sensor as shown in the illustration.

  3. REMOVE FRONT CORNER ULTRASONIC SENSOR

    Tech Tips

    The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


    1. A001Q8P

      Disconnect the connector.

    2. A005OABC01
      B0048R7 Remove in this Direction

      Disengage the claws to remove the front corner ultrasonic sensor as shown in the illustration.

  4. REMOVE FRONT CENTER ULTRASONIC SENSOR

    Tech Tips

    The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


    1. A001RDX

      Disconnect the connector.

    2. A005O9PC01
      B0048R7 Remove in this Direction

      Disengage the claws to remove the front center ultrasonic sensor as shown in the illustration.

  5. REMOVE FRONT SIDE ULTRASONIC SENSOR RETAINER

    Tech Tips


    • Perform this procedure only when replacement of the front side ultrasonic sensor retainer is necessary.

    • When removing the front side ultrasonic sensor retainer, heat the front bumper assembly and front side ultrasonic sensor retainer using a heat light.

    • The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


    1. Heat the front bumper assembly and front side ultrasonic sensor retainer using a heat light at the specified temperature for 3 to 5 minutes.

      Heating Temperature
      Item Temperature
      Front Bumper Assembly 40 to 60°C (104 to 140°F)
      Front Side Ultrasonic Sensor Retainer

      CAUTION:


      • Do not touch the heat light and heated parts.

      • Touching the heat light may result in burns.

      • Touching heated parts for a long time may result in burns.

      A005MVZC23
      *a Heated Part
      *b Heat Light
    2. A001OEV

      Remove the front side ultrasonic sensor retainer.

  6. REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER

    Tech Tips


    • Perform this procedure only when replacement of the front corner ultrasonic sensor retainer is necessary.

    • When removing the front corner ultrasonic sensor retainer, heat the front bumper assembly and front corner ultrasonic sensor retainer using a heat light.


    1. Heat the front bumper assembly and front corner ultrasonic sensor retainer using a heat light at the specified temperature for 3 to 5 minutes.

      Heating Temperature
      Item Temperature
      Front Bumper Assembly 40 to 60°C (104 to 140°F)
      Front Corner Ultrasonic Sensor Retainer

      CAUTION:


      • Do not touch the heat light and heated parts.

      • Touching the heat light may result in burns.

      • Touching heated parts for a long time may result in burns.

      A005MVZC23
      *a Heated Part
      *b Heat Light

    2. Remove the 2 front corner ultrasonic sensor retainers.

      A001PXT

  7. REMOVE FRONT CENTER ULTRASONIC SENSOR RETAINER


    1. A005NDYC01
      B0048R7 Remove in this Direction

      Disengage the claws to remove the front center ultrasonic sensor retainer as shown in the illustration.