CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM
Customizing with the GTS.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the TOYOTA parking assist-sensor system on.
Turn the GTS on.
Enter the following menus: Body Electrical / IPA/ICS/Clearance Sonar / Utility / Customize Setting.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Side Sensor Alarm Function | Side sensor alarm function setting | ON | 0:OFF,1:ON | Clearance warning ECU assembly |
| Side Sensor Onset Range | Side sensor detection range setting | Long | 0:Short,1:Long | Clearance warning ECU assembly |
| Fr & Rr Buzzer Volume | Changes the buzzer volume setting. | M2 | 001:L,010:M1,011:M2,100:M3,101:H | Clearance warning ECU assembly |
| Leave Buzzer Volume | Sets the volume of the buzzer with respect to the distance between the vehicle and a detected object. | L | 00:Keep Vol,01:L,10:M1,11:M2 | Clearance warning ECU assembly |