STEERING COLUMN ASSEMBLY REASSEMBLY

CAUTION / NOTICE / HINT

Note


  • Do not drop the power steering ECU assembly, strike it with tools or subject it to impacts.

  • If the power steering ECU assembly is subjected to an impact, replace it with a new one.

  • Do not pull the wire harness.

  • Do not allow any moisture to come into contact with the power steering ECU assembly.

  • Do not loosen any bolts not mentioned in the procedure.

  • Do not allow any foreign matter to contaminate the power steering ECU assembly.

PROCEDURE


  1. INSTALL ELECTRIC POWER STEERING MOTOR SHAFT DAMPER (for LHD)

    Click here

  2. INSTALL POWER STEERING ECU ASSEMBLY (for LHD)

    Click here

  3. INSTALL ELECTRIC POWER STEERING MOTOR SHAFT DAMPER (for RHD)

    Click here

  4. INSTALL POWER STEERING ECU ASSEMBLY (for RHD)

    Click here

  5. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

    Tech Tips

    When replacing the steering lock actuator assembly, refer to the Service Bulletin.


    1. A001PA4

      Install the steering lock actuator assembly with the tapered-head bolt.

    2. Tighten the tapered-head bolt until the bolt head breaks off.