| DTC Code | DTC Name |
|---|---|
| C13A0/11 | Open in Power Supply Relay Circuit |
| C13A5/41 | Electric Current of Motor |
| C13B0 | Electric Parking Brake ECU Malfunction |
DESCRIPTION
The following DTCs are stored when a malfunction occurs in the parking brake ECU assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |
|---|---|---|---|---|---|
| C13A0/11 | Open in Power Supply Relay Circuit | Both of following conditions are met:
|
Parking brake ECU assembly | DTC stored | An electric parking brake system malfunction is displayed on the multi-information display. |
| C13A5/41 | Electric Current of Motor | Both of following conditions are met:
|
Parking brake ECU assembly | DTC stored | An electric parking brake system malfunction is displayed on the multi-information display. |
| C13B0 | Electric Parking Brake ECU Malfunction | Both of following conditions are met:
|
Parking brake ECU assembly | DTC stored | An electric parking brake system malfunction is displayed on the multi-information display. |
| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | Power switch on (IG) | ○ | - |
| Electric parking brake switch (electric parking brake switch assembly) pulled to lock side with power switch off | - | ○ | |
| Malfunction Status | Parking brake ECU assembly's power source relay is open | ○ | ○ |
| Detection Time | Approximately 0.5 seconds | Approximately 0.5 seconds | |
| Number of Trips | 1 trip | 1 trip | |
Tech Tips
DTC will be output when conditions for either of the patterns in the table above are met.
| Vehicle Condition | |||||
|---|---|---|---|---|---|
| Pattern 1 | Pattern 2 | Pattern 3 | Pattern 4 | ||
| Diagnosis Condition | Power switch on (IG) | ○ | - | ○ | - |
| Electric parking brake switch (electric parking brake switch assembly) pulled to lock side with power switch off | - | ○ | - | ○ | |
| Malfunction Status | Parking brake ECU assembly's internal current is abnormal (When parking brake is operating) | ○ | ○ | - | - |
| Parking brake ECU assembly's internal current is abnormal (When parking brake is not operating) | - | - | ○ | ○ | |
| Detection Time | Approximately 0.3 seconds | Approximately 0.3 seconds | Approximately 0.5 seconds | Approximately 0.5 seconds | |
| Number of Trips | 1 trip | 1 trip | 1 trip | 1 trip | |
Tech Tips
DTC will be output when conditions for either of the patterns in the table above are met.
| Vehicle Condition | |||||
|---|---|---|---|---|---|
| Pattern 1 | Pattern 2 | Pattern 3 | Pattern 4 | ||
| Diagnosis Condition | Power switch on (IG) | ○ | - | ○ | - |
| Electric parking brake switch (electric parking brake switch assembly) pulled to lock side with power switch off | - | ○ | - | ○ | |
| Malfunction Status | Parking brake ECU assembly's internal voltage is abnormal | ○ | ○ | - | - |
| EEPROM is malfunctioning | - | - | ○ | ○ | |
| Detection Time | Approximately 0.5 seconds | Approximately 0.5 seconds | Approximately 0.5 seconds | Approximately 0.5 seconds | |
| Number of Trips | 1 trip | 1 trip | 1 trip | 1 trip | |
Tech Tips
DTC will be output when conditions for either of the patterns in the table above are met.
CAUTION / NOTICE / HINT
Note
When replacing the parking brake ECU assembly, operate the electric parking brake switch (electric parking brake switch assembly) as the parking brake indicator light (red) blinks when the power switch is first turned on (IG).
PROCEDURE
REPLACE PARKING BRAKE ECU ASSEMBLY
Replace the parking brake ECU assembly.
| Result | ||
|---|---|---|
|
| NEXT |
|
END |