BRAKE BOOSTER PUMP(for LHD) INSPECTION

PROCEDURE


  1. INSPECT BRAKE BOOSTER PUMP ASSEMBLY


    1. Check the resistance.


      1. A001QLPC07
        *a

        Component without harness connected

        (Brake Booster Pump Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 (BM1) - 4 (GND1) Always Below 10 Ω
        1 (BM2) - 3 (GND2) Always Below 10 Ω
        2 (BM1) - 1 (BM2) Always Below 1 Ω
        4 (GND1) - 3 (GND2) Always Below 1 Ω