SHIFT LEVER REMOVAL

Info Added 2017-10-06

PROCEDURE


  1. SECURE VEHICLE


    1. A005NBS

      Fully apply the parking brake and chock a wheel.

      CAUTION:


      • Make sure to apply the parking brake and chock a wheel before performing this procedure.

      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

  2. REMOVE SHIFT LEVER CAP


    1. A005MRKC01
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove the shift lever cap from the shift position indicator.

      Note

      Be careful not to damage the shift lever cap and instrument panel ornament.

    2. Move the shift lever to N.

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  4. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  5. REMOVE NO. 1 CONSOLE BOX MOUNTING BRACKET


    1. A005NM2

      w/ Stereo Component Amplifier:


      1. Disengage the 3 clamps to separate the wire harness from the No. 1 console box mounting bracket.

      2. Remove the 2 bolts and No. 1 console box mounting bracket from the vehicle body.

    2. w/o Stereo Component Amplifier:


      1. A005NKN

        Disengage the 2 clamps to separate the wire harness from the No. 1 console box mounting bracket.

      2. Remove the 2 bolts and No. 1 console box mounting bracket from the vehicle body.

  6. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A005O7PC01
      B0048R7 Remove in this Direction

      Disconnect the end of the transmission control cable assembly from the floor shift shift lever assembly.

    2. A005NXFC01
      *1 Slider
      B0048I2 Push
      B0048R7 Remove in this Direction

      Push in the slider and remove the transmission control cable from the floor shift shift lever assembly as shown in the illustration

  7. REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY (for LHD)


    1. A005O9H

      Disconnect the 2 connectors from the floor shift shift lever assembly.

    2. Disengage the 6 clamps to separate the wire harness from the floor shift shift lever assembly.

    3. A005NI9

      Remove the 4 bolts and floor shift shift lever assembly from the vehicle body.

  8. REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY (for RHD)


    1. A005N4S

      Disconnect the connectors from the floor shift shift lever assembly.

    2. Disengage the 3 clamps to separate the wire harness from the floor shift shift lever assembly.

    3. A005NJN

      w/ Stereo Component Amplifier:


      1. Disconnect the connectors from the floor shift shift lever assembly.

      2. Disengage the 2 clamps to separate the wire harness from the floor shift shift lever assembly.

    4. A005NSX

      w/o Stereo Component Amplifier:


      1. Disconnect the connectors from the floor shift shift lever assembly.

      2. Disengage the clamp to separate the wire harness from the floor shift shift lever assembly.

    5. A005NRB

      Remove the 4 bolts and floor shift shift lever assembly from the vehicle body.