FORWARD RECOGNITION CAMERA SYSTEM, Diagnostic DTC:U0101, U0123, U0126, U0129, U0142, U0155, U0293

DTC Code DTC Name
U0101 Lost Communication With TCM
U0123 Lost Communication with Yaw Rate Sensor Module
U0126 Lost Communication with Steering Angle Sensor Module
U0129 Lost Communication with Brake System Control Module
U0142 Lost Communication with Body Control Module "B"
U0155 Lost Communication with Combination Meter
U0293 Lost Communication with HV ECU

DESCRIPTION

When a malfunction is detected between various ECUs and sensors, these DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0101 Lost Communication With TCM While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the TCM (ECM) and the forward recognition camera is detected for approximately 5 seconds or more.

  • CAN communication system

  • TCM (ECM)

  • Forward recognition camera
U0123 Lost Communication with Yaw Rate Sensor Module While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the yaw rate and acceleration sensor (airbag sensor assembly) and the forward recognition camera is detected for approximately 5 seconds or more.

  • CAN communication system

  • Yaw rate and acceleration sensor (airbag sensor assembly)

  • Forward recognition camera
U0126 Lost Communication with Steering Angle Sensor Module 3 seconds after the power switch is turned on (IG), a communication error between the steering angle sensor (spiral cable sub-assembly) and the forward recognition camera is detected for approximately 5 seconds or more.

  • CAN communication system

  • Steering angle sensor (spiral cable sub-assembly)

  • Forward recognition camera
U0129 Lost Communication with Brake System Control Module 3 seconds after the power switch is turned on (IG), a communication error between the skid control ECU (brake booster with master cylinder assembly) and the forward recognition camera is detected for approximately 5 seconds or more.

  • CAN communication system

  • Skid control ECU (brake booster with master cylinder assembly)

  • Forward recognition camera
U0142 Lost Communication with Body Control Module "B" 3 seconds after the power switch is turned on (IG), a communication error between the combination meter assembly and the forward recognition camera is detected for approximately 5 seconds or more.

  • CAN communication system

  • Combination meter assembly

  • Forward recognition camera
U0155 Lost Communication with Combination Meter 3 seconds after the power switch is turned on (IG), a communication error between the combination meter assembly and the forward recognition camera is detected for approximately 50 seconds or more.

  • CAN communication system

  • Combination meter assembly

  • Forward recognition camera
U0293 Lost Communication with HV ECU 3 seconds after the power switch is turned on (IG), a communication error between the hybrid vehicle control ECU and the forward recognition camera is detected for approximately 5 seconds.

  • CAN communication system

  • Hybrid vehicle control ECU

  • Forward recognition camera

PROCEDURE


  1. CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)


    1. Clear the DTCs.

      Click here


      Chassis > Front Recognition Camera > Clear DTCs

    2. Make sure that the DTC detection conditions are met.

      Tech Tips

      If the conditions are not met, the system cannot detect the malfunction.

    3. Check for DTCs.

      Click here


      Chassis > Front Recognition Camera > Trouble Codes
      Result
      Result Proceed to
      DTC U0101, U0123, U0126, U0129, U0142, U0155 or U0239 are not output A
      DTC U0101, U0123, U0126, U0129, U0142, U0155 or U0239 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    GO TO CAN COMMUNICATION SYSTEM Click here