CRUISE CONTROL SYSTEM, Diagnostic DTC:P157800

DTC Code DTC Name
P157800 Brake System

DESCRIPTION

This DTC is stored when the electronically controlled brake system has a problem. Check the electronically controlled brake system when DTC P157800 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
P157800 Brake System When the power switch is on (IG) and the cruise control system is operating, a malfunction in the electronically controlled brake system is detected for 0.2 seconds or more.

  • Electronically controlled brake system

  • Hybrid vehicle control ECU

  • Skid control ECU (Brake booster with master cylinder assembly)

CAUTION / NOTICE / HINT

Note

Before replacing the hybrid vehicle control ECU, refer to Service Bulletin.

PROCEDURE


  1. CHECK FOR DTCs (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)


    1. Check for DTCs.

      Click here


      Chassis > ABS/VSC/TRC > Trouble Codes
      OK
      Electronically controlled brake system DTCs are not output.
      Result
      Proceed to
      OK
      NG

    NG

    GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM Click here

    OK

  2. CHECK FOR DTCs (CRUISE CONTROL SYSTEM)


    1. Clear the DTCs.

      Click here


      Powertrain > Cruise Control > Clear DTCs

    2. Perform the following to make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the malfunction cannot be detected.


      1. Drive the vehicle at a speed for which cruise control operation is possible.

      2. Turn the cruise control system on using the cruise control main switch (ON/OFF button).

      3. Push the cruise control main switch to -SET to begin control of vehicle speed using the cruise control system.

    3. Check for DTCs.

      Click here


      Powertrain > Cruise Control > Trouble Codes
      OK
      DTC P157800 is not output.
      Result
      Proceed to
      OK
      NG

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

  3. REPLACE HYBRID VEHICLE CONTROL ECU


    1. Replace the hybrid vehicle control ECU.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  4. CHECK FOR DTCs (CRUISE CONTROL SYSTEM)


    1. Clear the DTCs.

      Click here


      Powertrain > Cruise Control > Clear DTCs

    2. Perform the following to make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the malfunction cannot be detected.


      1. Drive the vehicle at a speed for which cruise control operation is possible.

      2. Turn the cruise control system on using the cruise control main switch (ON/OFF button).

      3. Push the cruise control main switch to -SET to begin control of vehicle speed using the cruise control system.

    3. Check for DTCs.

      Click here


      Powertrain > Cruise Control > Trouble Codes
      OK
      DTC P157800 is not output.
      Result
      Result Proceed to
      OK A
      NG (for RHD) B
      NG (for LHD) C

    A

    END

    B

    REPLACE BRAKE ACTUATOR ASSEMBLY Click here

    C

    REPLACE BRAKE ACTUATOR ASSEMBLY Click here