RADIATOR COMPONENTS
Info Added 2017-10-06 
ILLUSTRATION
| *1 | NO. 1 ENGINE UNDER COVER | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/ Grill Shutter | - | - |
| *1 | FRONT BUMPER ENERGY ABSORBER | *2 | FRONT BUMPER REINFORCEMENT |
| *3 | NO. 1 RADIATOR AIR GUIDE LH | *4 | NO. 1 RADIATOR AIR GUIDE RH |
| *5 | RADIATOR SHUTTER SUB-ASSEMBLY | *6 | RADIATOR LOWER SEAL LH |
| *7 | RADIATOR LOWER SEAL RH | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/o Engine Hood Courtesy Switch | *B | w/ Engine Hood Courtesy Switch |
| *C | for LHD | *D | for RHD |
| *1 | FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY | *2 | NO. 1 RADIATOR GRILL RETAINER |
| *3 | NO. 1 RADIATOR TO SUPPORT SEAL | *4 | HOOD LOCK ASSEMBLY |
| *5 | HOOD LOCK CONTROL CABLE ASSEMBLY | *6 | HOOD LOCK NUT CAP |
| *7 | NO. 2 AIR CLEANER INLET | *8 | UPPER RADIATOR SUPPORT SUB-ASSEMBLY |
| *9 | NO. 2 RADIATOR AIR GUIDE | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
MP grease | - | - |
ILLUSTRATION
| *1 | COOLER CONDENSER ASSEMBLY | *2 | DISCHARGE HOSE SUB-ASSEMBLY |
| *3 | SUCTION PIPE SUB-ASSEMBLY | *4 | O-RING |
| *5 | PIPING CLAMP | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
Compressor oil ND-OIL 11 or equivalent | - | - |
ILLUSTRATION
| *1 | RADIATOR SUPPORT GROMMET | *2 | INLET HYBRID RADIATOR HOSE |
| *3 | INLET NO. 1 INVERTER COOLING HOSE | *4 | INVERTER RESERVE TANK ASSEMBLY |
| *5 | NO. 1 RADIATOR HOSE | *6 | NO. 1 WATER BY-PASS HOSE |
| *7 | NO. 2 RADIATOR HOSE | *8 | NO. 2 WATER BY-PASS HOSE |
| *9 | OUTLET NO. 1 INVERTER COOLING HOSE | *10 | RADIATOR ASSEMBLY |
| *11 | RADIATOR SUPPORT CUSHION | *12 | FAN SHROUD ASSEMBLY |
| *13 | INLET HYBRID WATER PUMP HOSE | *14 | O-RING |
| *15 | RADIATOR DRAIN COCK PLUG | - | - |